 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ILOSAM ELECTRONICS CO., LTD. XY-14 SPECIFICATIONS: TYPE www..com FEATURES: Case: Black MPPO Pin: Tin-Plated Copper UNIT dB Vp-p Vp-p Hz mA pF g XY-14 80 5 120 4000500 2 1200030% -20+70 -30+80 2 Min. Sound Output at 10 cm Rated Voltage Operating Voltage Resonant Frequency Max. Current Consumption Capacitance at 1000Hz Operating Temperature Storage Temperature Weight Value applying at rated voltage DIMENSIONS : (Unit: mm) FREQUENCY RESPONSE: Address : Chung-Ang Circulation complex(GA-Dong/3428) #1258 Kurobon-Dong Kuro-Gu SEOUL KOREA Tel: 82-2-26150158 Fax: 82-2-26151043 E-mail: izicom@ilosam.co.kr Web site: www.ilosam.co.kr SPECIFICATION SHEET www..com CUSTOMER: PRODUCT: PIEZO TRANSDUCER MODEL NUMBER: XY-14 ILOSAM ELECTRONICS CO., LTD. TEL: +82-2-26150158 FAX: +82-2-26151043 POST CODE : 152-721 ADD: Chung-Ang Circulation complex(GA-Dong/3428) #1258 Kurobon-Dong Kuro-Gu SEOUL KOREA E-mail: izicom@ilosam.co.kr Http://www.ilosam.co.kr 1.SPECIFICATIONS ITEMS RATED VOLTAGE MAX.ALLOWABLE INPUT VOLTAGE RATED CURRENT CAPACITANCE www..com XY-14 SPECIFICATIONS 5Vp-p/4.0KHz 20Vp-p LESS THAN 2mA/5Vp-p/4.0KHz 1200030%pF SINGLE MORE THAN 80dB MIN.SOUND PRESSURE LEVEL AT 10CM/4.0KHz/9Vp-p SQUARE WAVE MEASURING AT THE RATED VOLTAGE APPLYING RATED VOLTAGE CONDITIONS TONE NATURE SOUND OUTPUT FREQUENCY PIN STRENGTH OPERATING TEMPERATURE DIMENSION APPEARANCE 4000500Hz MORE THAN 1Kg -30 ~ +85 SEE FIG. 1 ATTACHED THERE SHOULD BE NO REMARKABLE STAINS, RUSTS OR FLAWS. NOTE: TEST SHOULD BE MADE UNDER THE CONDITIONS OF ROOM TEMPERATURE (20 10 ), HUMIDITY (60 20%) AND NORMAL ATMOSPHERIC PRESSURE. IN THE CASE, HOWEVER, THAT THE JUDGMENT IS QUESTIONABLE, THE TEST CONDITIONS ARE TO BE CHANGED TO ROOM TEMPERATURE 20 2 , RELATIVE HUMIDITY 60-70% AND NORMAL ATMOSPHERIC PRESSURE. 2. INSPECTION STANDARD ITEM TESTED SYM STANDARD AQL XY-14 LEVEL INSPECTION BY MEANS OF REMARKS AT EACH 1Vp-p, 5Vp-p, 20Vp-p/4.0KHz THERE SHOULD BE NO NONSOUNDING, HARSH SOUND MIN. SOUND PRESSURE LEVEL AT 10CM/4KHz/5Vp-p SQUARE WAVE NO SOUNDING 5Vp-p/4.0KHz 0.25 EARS SOUND OUTPUT www..com CURRENT MORE THAN 80dB WHEN APPLYING RATED VOLTAGE LESS THAN 2mA WHEN APPLYING RATED VOLTAGE 1200030%pF 4000500Hz A B C D E 14.00.2 7.00.2 3.70.5 7.60.2 0.70.1 MORE THAN 1KG 1 SOUND PRESSURE LEVEL METER MULTIMETER 0.65 CAPACITANC E BASIC FREQUENCY OUTER DIAMETER OVERALL HEIGHT PIN'S LENGTH PIN'S PITCH PIN'S DIAMETER PIN'S STRENGTH STATE OF SOLDER RUST STAIN 0.65 1 LC METER TO BE MEASURED AT THE MAXIMUM DIAMETER 1.5 S-3 ELECTRONICS CALIPERS TO BE MEASURED AT THE FOOT OF THE PINS 0.65 S-3 TENSION GAUGE MAGNIFYING GLASS EYES EYES BY PULLING EACH PIN SOLDERED POINTS AND /OR COIL DISPOSITION SHOULD BE PROPER. (CROSSED COIL WIRE ARE NOT ACCEPTED) ANY RUST SHOULD NOT BE ACCEPTED THERE SHOULD BE REMARKBLE STAINS NO 1 1 1.5 ADHESION 1.5 EYES ADHESION SHOULD BE MADE SUFFICIENTLY AND THERE SHOULD BE NO OUTFLOW OF ADHESIVE AGENT. OTHER APPEARANC E 1.5 EYES 3. RELIABILITY TEST ITEM OPERATING TEMP. STORAGE IN HIGH TEMP. XY-14 METHOD OF TEST -20 ~ +60 STORAGE IN 70 TEST BOX FOR 96 HOURS THEN EXPOSE TO THE ROOM TEMP. FOR 2 HOURS. STORAGE IN -30 TEST BOX FOR STANDARD STORAGE IN LOW TEMP www..com 96 HOURS THEN EXPOSE TO THE ROOM TEMP. FOR 2 HOURS. OPERATE THE TRANSDUCER CONTINUOUSLY AT 5 SECONDS ON AND 5 SECONDS OFF FOR 500 HOURS AT RATED VOLTAGE. MAKE THE TEST FOR 5 CYCLES WITHOUT APPLYING POWER AS FIG.3, THEN EXPOSE TO THE ROOM TEMP. FOR 2 HOURS. MAKE THE TEST FOR 10 CYCLES LIFE TEST IN THE ROOM TEMP TEMPCYCLE TEST TEMP./HUMIDITY CYCLE TEST WITHOUT APPLING POWER AS FIG.4, MAKE HOURS THEN THE EXPOSE TEST (1.5 TO FOR THE THE ROOM TEMP. FOR 2 HOURS DIRECTIONS OF X,Y,AND Z FOR 0.5 EACH HOURS) TO-AND-FRO SWEEP TIME (FROM 10Hz TO 55 Hz AND THEN FROM 55Hz TO 10Hz) UNDER SINGLE AMPLITUDE MINUTE. DROP A TRANSDUCER NATURALLY FROM THE HEIGHT OF 700mm ONTO SURFACE OF 10mm THICK WOODEN BOARD. TWO DIRECTIONS: THE UPPER AND SIDE OF THE TRANSDUCER ARE TO BE APPLIED FOR THIS DROP TEST RESPECTIVELY ONCE. OF 0.75mm IS 1 ALL SPECIFICATIONS MUST BE SATISFIED AFTER THE TEST VIBRATION TEST DROP TEST DIMENSION (UNIT: mm) PART NUMBER: XY-14 www..com NOTE: PLEASE SEE A.B.C.D.E. IN THE SECOND VOLUME "SYM" IN PAGE 2 FIG. 1 FREQUENCY RESPONSE (typical curve of type XY-14) www..com FIG.2 +702 +255 +255 www..com 30MIN -305 10MIN 30MIN 1 CYCLE 10MIN 5 CYCLES FIG.3 +402 953%RH 6 HOURS 252 953%RH 30MIN 30MIN 5HOURS 10CYCLES 10CYCLES 1 CYCLE 10 CYCLES FIG.4 ELECTRICAL CHARACTERISTIC TEST METHOD www..com S.A. C.MIC 30 10CM Q.S.C. F.C. A.V.M. T.S. A.A.M. S.R. S.A. :SPECTRUM ANALYAER F.C :FREQUENCY COUNTER A.A.M. :AC AMPERE METER S.R. :SOUNDPROOF ROOM A.V.M. :AC VOLT. METER T.S. :TESTING SAMPLE C.MIC :CONDENSER MIC Q.S.C. :OSCILLATOR FIG.5 |
Price & Availability of ALP1205S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |